Rolf's Discussions (266)

Discussions Replied To (241) Replies Latest Activity

MEMBER

"Your description sounds like the starter pinion. If the starter motor spins and the…"

Rolf replied Feb 16 to ET4 starter motor.

15 Feb 20
Reply by Bob

"I was running the 26.26g on a ported Malossi 166 with a tuned pipe.  I think your n…"

Rolf replied Feb 14 to Carburettor upgrade

4 Feb 14
Reply by paul bishop

"I have a 26.26g which is a good upgrade if you are running a performance barrel and…"

Rolf replied Feb 14 to Carburettor upgrade

4 Feb 14
Reply by paul bishop

"Could it be that the auto lube two stroke oil is leaking off the gearbox from the ca…"

Rolf replied Nov 18, 2019 to Oil leak

7 Nov 20, 2019
Reply by Craig Fillingham

"I used one of these on a VNA that I rebuilt. Worked fairly well. https://beedspeed.c…"

Rolf replied Aug 25, 2019 to 59 vespa speedo

3 Sep 12, 2019
Reply by Roberto Ceppellini

"Hi Paul. Many things are possible, but have you checked out the Scooterhelp Gear cal…"

Rolf replied Jul 12, 2019 to Increasing gear ratio

4 Oct 14, 2019
Reply by paul bishop

MEMBER

"Talk to an engineer first. I think you’ll find this is not possible if you want to r…"

Rolf replied Mar 19, 2019 to Vespa chopper

2 Mar 25, 2019
Reply by Eric Dang

MEMBER

"Lambretta parking is way over there. "

Rolf replied Feb 25, 2019 to Best Caption Competition—Free Breakfast Prize

11 Mar 9, 2019
Reply by Ants Elliott

MEMBER

"Good luck with that. You’re scooter should have 8 inch wheels but has some sort of c…"

Rolf replied Dec 30, 2018 to WTB - 10 inch classic Vespa rim to use as a spare.

1 Dec 30, 2018
Reply by Rolf

"The G connection is what regulates the voltage. Both G connections are connected int…"

Rolf replied Dec 20, 2018 to PX voltage regulator wiring

4 Dec 21, 2018
Reply by paul bishop

RSS

© 2020   Vespa Club of Melbourne Incorporated in Victoria A005069N   Powered by

Badges  |  Report an Issue  |  Terms of Service