Somebody have a definite answer re 1980 p200e VSX1T gear selector box. The one fitted now is part 138880 FA branded. This number coincides with SIP part number. Seems to be slightly different types of these with respect to the height of the pawl above gasket surface ... some sites state should be 1.5mm above gasket in 3rd gear. The one I have the pawl is about .5mm below the gasket surface. I have 3 boxes and all are the same. Have to replace as there is wear in shaft, and now not sure if the one i took off is correct, or has been replaced with late model one. Anyone have a clue on this? Thanks heaps. PaulB

Views: 29

Reply to This

Visit our supporters

Latest FB

© 2017   Vespa Club of Melbourne Incorporated in Victoria A005069N   Powered by

Badges  |  Report an Issue  |  Terms of Service