I got another call from Roberto (Vespa Wizard) re: a '1973 Vespa (auto lube) Super' that a customer of his brought in for extensive mechanical refurbishment. Apart from the mechanical work, the body has also had a checkered past, with corrosion evident, numerous non factory drilled holes and a range of dings 'n' dents.

After viewing it, I agreed to carry out the various bodywork repairs. Alessio the owner doesn't want any filler (bog) used and that's fine by me, as I'll be using traditional methods of 'leading' to repair surface corrosion, primarily on the footboards of the scooter.

Here are some pix illustrating the current state of the body illustrating where the repairs are needed.

Note: The scooter has been sand blasted. Be very cautious if you choose this option on fragile/precious scooter bodies/panels, as it can easily deform them.

Views: 313

Attachments:

Reply to This

Replies to This Discussion

Hi Vincent

Good on you for taking on the job. Can't wait to see the progress shots.

Another scooter Allessio?

I always shudder when people drill holes in their scooters.

Number 6 fortunately

Day 2 (10.10.17)
The repairs on the scooter body today included: welding closed various extraneous holes, punctures and tears in the metal panel work. Straigtening the sides (and some welding on the rear section) of the scooter so that the rear covers fit correctly. A bit of tedious metal finishing removing small dents/dings on the front RHS wind/splash shield and cutting out, straightening and then rewelding a dented panel section at the rear seat corner. This area had a some time, received a heavy impact blow. As it's a corner section an quite complex the easiest method repair was to cut the piece out and reshape on the bench. There was also a reinforcement panel behind it that had sustained damage.

Of course it could have been filled with a 2 cm thick layer of plastic filler (bog), but I tend to think Alessio is not keen to go down that path. I agree!


Pictures below this reply (as I won't be able to post the images within the remaining edit time Admin!)

Take 3...

looks great, just don't know what colour to do it???

I haven't seen one in pink yet Alessio...could be an opportunity to make a bold statement!

PS. I think (unless there's something unforeseen) it should all be done well within a fortnight.

I'm about to go out and do the repairs on the LHS rear cover...remake the perforated rear corner piece. A couple of drainage holes might be a good idea as water obviously sits inside causing corrosion internally. Condensation would do it over a period of time.

haha i think about it, the gf would be happy with that colour. 

The scooter is stored indoors but yes it is a good idea for drainage holes

Scooter Repairs. Day 3.  1108.17
I spent a good portion of the day repairing the LHS rear cover. The work focused on remaking, then fitting the corroded rear section of the cover (from flat panel steel), ensuring the outer cover profile fitted the side of the body snugly and refitting one of the rear securing mounts, which I cut free of the old rotted panel section.
Here are the pix.

Alessio's Scooter Repairs.  Day 4.   12.10.17
With virtually all of the metal work repairs completed, the focus for today is leading over the finished welds and other imperfections on the body and rear covers that require it.  Once the leading is done the areas attended to are linished back to the correct panel profiles.

Day. 5   14.10.17
Finished the remaining work on the scooter body today. The work focused primarily on cleaning/preparing the  panel surfaces for etch primer. This product provides a good key for the following coats of primer, primer surfacer and/or a skim of filler, if required. It also protects the metal body from surface rust (moisture in the air) whilst the final body prep is taking place.
After the  scooter surfaces were thoroughly cleaned, the etch primer was applied with a spray gun. As it was a nice warm day the conditions were ideal. Once all the panels were coated, I poured the contents of a small container of POR15 into the tunnel area of the scooter and rocked it to and forth. This can be messy. Also need to be very careful with this product, as if it gets on your skin it becomes a permanent coating until it literally wears off! The product literally oozes into and out of seams as can be seen in one of the photos below.
All up,  the work repairing the scooter body and also correcting the poor fitting rear covers took just under 19 hrs and just over a couple of hundred dollars in consumables.

Picked up the frame today from Vince.

Dropped it off to my panel beater spray painter. He works for a prestige repair company and does close mates home jobs for something to do. He was quite impressed with the work that has been done to the frame so far.
There’s prob 20 hours of work just to get into high fill.

I’ve given him the paint codes for all the suspension and rims to be painted in the original silver Piaggio brought it out with.

I’ve desided to go a flat blue for it. There is so many colours out there and I looked at the Vespa tecnica books and there isn’t much on original colours. There was over 500,000 supers produced and you could order one in any colour so it won’t matter much choosing a colour that’s not say factory or the standard colours people do.

Below is a sample of what colour I will do it. Excuse the man in the suit.

I’m away overseas for a week. Gab the spray painter said it will take a month approx. as he would like to leave it in primer for 2 weeks in his hot sunroom to dry right though this way there will be less orange peel. He will give me options for colour and clears when he gets to it.
As there is clear coat that costs 250 to 2k

photos 

Attachments:

RSS

Visit our supporters

Latest Activity

Kevin O'Brien replied to Kevin O'Brien's discussion PX indicator globe required
3 hours ago
Julie Pond replied to Kevin O'Brien's discussion PX indicator globe required
3 hours ago
Kevin O'Brien posted a discussion
3 hours ago
Anthony Elliott is attending Greg_'s event
Thumbnail

Carlton Italian Festa - Sun 22 Oct Updated at Argyle Square

October 22, 2017 from 10am to 4pm
4 hours ago
Andrew Mackew is attending Vespa Club of Melbourne's event
Thumbnail

Monthly Melbourne Breakfast SUN 12 Nov - Note different Venue! at Dr Morse - Victoria Park Station

November 12, 2017 from 8:30am to 10:30am
yesterday
Profile IconJB and Allan Snashall are attending Vespa Club of Melbourne's event
Thumbnail

Annual Christmas Celebration - Sun 3 Dec at Pertutti

December 3, 2017 from 11am to 3pm
yesterday
luke left a comment for Mark
yesterday
Julie Pond left a comment for Matt illingworth
yesterday
Profile IconMatt illingworth and Miguel Meirelles joined Vespa Club of Melbourne
yesterday
Profile IconPeter Barclay, Belinda Dalli, Renee and 3 other members are attending Greg_'s event
Thumbnail

Carlton Italian Festa - Sun 22 Oct Updated at Argyle Square

October 22, 2017 from 10am to 4pm
yesterday
John Walker commented on Vespa Club of Melbourne's event 'Geelong Monthly Breakfast Sun 22 Oct - new riders welcome'
yesterday
Profile IconGreg_, Pam Williams and Julie Pond are attending Allan Snashall's event

Ryde to Rye- Sun 29 Oct at Cafe Moto and the Mornington Penninsula

October 29, 2017 from 8:30am to 3pm
yesterday
Allan Snashall is attending Vespa Club of Melbourne's event
Thumbnail

Annual Round the Bay Ride - Sun 10 Dec at Round Port Phillip Bay

December 10, 2017 from 7am to 5pm
Tuesday
Allan Snashall posted an event

Breakfast at Cafe Moto - Carrum and Mornington Penninsula ride at Cafe Moto and the Mornington Penninsula

October 29, 2017 from 8:30am to 3pm
Tuesday
Ross Amphlett is attending Vespa Club of Melbourne's event
Thumbnail

Monthly Melbourne Breakfast SUN 14 Jan - New riders welcome at Abbotsford Convent Bakery (park inside the gates)

January 14, 2018 from 8:30am to 10:30am
Tuesday
Ross Amphlett is attending Vespa Club of Melbourne's event
Thumbnail

Geelong Monthly Breakfast Sun 17 Dec - new riders welcome at The Edge

December 17, 2017 from 8:30am to 10:30am
Tuesday
Ross Amphlett is attending Vespa Club of Melbourne's event
Thumbnail

Annual Christmas Celebration - Sun 3 Dec at Pertutti

December 3, 2017 from 11am to 3pm
Tuesday
Julie Pond left a comment for Miguel Meirelles
Tuesday
Jo Hedt updated their profile
Tuesday
Jo Hedt might attend Greg_'s event
Thumbnail

Carlton Italian Festa - Sun 22 Oct Updated at Argyle Square

October 22, 2017 from 10am to 4pm
Tuesday

© 2017   Vespa Club of Melbourne Incorporated in Victoria A005069N   Powered by

Badges  |  Report an Issue  |  Terms of Service