I got another call from Roberto (Vespa Wizard) re: a '1973 Vespa (auto lube) Super' that a customer of his brought in for extensive mechanical refurbishment. Apart from the mechanical work, the body has also had a checkered past, with corrosion evident, numerous non factory drilled holes and a range of dings 'n' dents.

After viewing it, I agreed to carry out the various bodywork repairs. Alessio the owner doesn't want any filler (bog) used and that's fine by me, as I'll be using traditional methods of 'leading' to repair surface corrosion, primarily on the footboards of the scooter.

Here are some pix illustrating the current state of the body illustrating where the repairs are needed.

Note: The scooter has been sand blasted. Be very cautious if you choose this option on fragile/precious scooter bodies/panels, as it can easily deform them.

Views: 303

Attachments:

Reply to This

Replies to This Discussion

Hi Vincent

Good on you for taking on the job. Can't wait to see the progress shots.

Another scooter Allessio?

I always shudder when people drill holes in their scooters.

Number 6 fortunately

Day 2 (10.10.17)
The repairs on the scooter body today included: welding closed various extraneous holes, punctures and tears in the metal panel work. Straigtening the sides (and some welding on the rear section) of the scooter so that the rear covers fit correctly. A bit of tedious metal finishing removing small dents/dings on the front RHS wind/splash shield and cutting out, straightening and then rewelding a dented panel section at the rear seat corner. This area had a some time, received a heavy impact blow. As it's a corner section an quite complex the easiest method repair was to cut the piece out and reshape on the bench. There was also a reinforcement panel behind it that had sustained damage.

Of course it could have been filled with a 2 cm thick layer of plastic filler (bog), but I tend to think Alessio is not keen to go down that path. I agree!


Pictures below this reply (as I won't be able to post the images within the remaining edit time Admin!)

Take 3...

looks great, just don't know what colour to do it???

I haven't seen one in pink yet Alessio...could be an opportunity to make a bold statement!

PS. I think (unless there's something unforeseen) it should all be done well within a fortnight.

I'm about to go out and do the repairs on the LHS rear cover...remake the perforated rear corner piece. A couple of drainage holes might be a good idea as water obviously sits inside causing corrosion internally. Condensation would do it over a period of time.

haha i think about it, the gf would be happy with that colour. 

The scooter is stored indoors but yes it is a good idea for drainage holes

Scooter Repairs. Day 3.  1108.17
I spent a good portion of the day repairing the LHS rear cover. The work focused on remaking, then fitting the corroded rear section of the cover (from flat panel steel), ensuring the outer cover profile fitted the side of the body snugly and refitting one of the rear securing mounts, which I cut free of the old rotted panel section.
Here are the pix.

Alessio's Scooter Repairs.  Day 4.   12.10.17
With virtually all of the metal work repairs completed, the focus for today is leading over the finished welds and other imperfections on the body and rear covers that require it.  Once the leading is done the areas attended to are linished back to the correct panel profiles.

Day. 5   14.10.17
Finished the remaining work on the scooter body today. The work focused primarily on cleaning/preparing the  panel surfaces for etch primer. This product provides a good key for the following coats of primer, primer surfacer and/or a skim of filler, if required. It also protects the metal body from surface rust (moisture in the air) whilst the final body prep is taking place.
After the  scooter surfaces were thoroughly cleaned, the etch primer was applied with a spray gun. As it was a nice warm day the conditions were ideal. Once all the panels were coated, I poured the contents of a small container of POR15 into the tunnel area of the scooter and rocked it to and forth. This can be messy. Also need to be very careful with this product, as if it gets on your skin it becomes a permanent coating until it literally wears off! The product literally oozes into and out of seams as can be seen in one of the photos below.
All up,  the work repairing the scooter body and also correcting the poor fitting rear covers took just under 19 hrs and just over a couple of hundred dollars in consumables.

Picked up the frame today from Vince.

Dropped it off to my panel beater spray painter. He works for a prestige repair company and does close mates home jobs for something to do. He was quite impressed with the work that has been done to the frame so far.
There’s prob 20 hours of work just to get into high fill.

I’ve given him the paint codes for all the suspension and rims to be painted in the original silver Piaggio brought it out with.

I’ve desided to go a flat blue for it. There is so many colours out there and I looked at the Vespa tecnica books and there isn’t much on original colours. There was over 500,000 supers produced and you could order one in any colour so it won’t matter much choosing a colour that’s not say factory or the standard colours people do.

Below is a sample of what colour I will do it. Excuse the man in the suit.

I’m away overseas for a week. Gab the spray painter said it will take a month approx. as he would like to leave it in primer for 2 weeks in his hot sunroom to dry right though this way there will be less orange peel. He will give me options for colour and clears when he gets to it.
As there is clear coat that costs 250 to 2k

photos 

Attachments:

RSS

Visit our supporters

Latest Activity

Profile IconRenee, Leonie Bowers-Taylor, Ross Amphlett and another member are attending Greg_'s event
Thumbnail

Carlton Italian Festa - Sun 22 Oct Updated at Argyle Square

October 22, 2017 from 10am to 4pm
2 hours ago
Profile IconPam Williams and Julie Pond are attending Allan Snashall's event

Breakfast at Cafe Moto - Carrum and Mornington Penninsula ride Sun 29 Oct at Cafe Moto and the Mornington Penninsula

October 29, 2017 from 8:30am to 3pm
We start our day with a meet up at our favourite bike themed hangout - Café Moto, in Carrum. Join…See More
11 hours ago
Allan Snashall is attending Vespa Club of Melbourne's event
Thumbnail

Annual Round the Bay Ride - Sun 10 Dec at Round Port Phillip Bay

December 10, 2017 from 7am to 5pm
Our annual celebration! A core group rides right around the Bay on a tight schedule. We meet &…See More
12 hours ago
Profile IconAllan Snashall and Ross Amphlett are attending Vespa Club of Melbourne's event
Thumbnail

Annual Christmas Celebration - Sun 3 Dec at Pertutti

December 3, 2017 from 11am to 3pm
Members!Come along and celebrate another great year of riding at our annual Christmas Party. Right…See More
12 hours ago
Allan Snashall posted an event

Breakfast at Cafe Moto - Carrum and Mornington Penninsula ride at Cafe Moto and the Mornington Penninsula

October 29, 2017 from 8:30am to 3pm
We start our day with a meet up at our favourite bike themed hangout - Café Moto, in Carrum. Join…See More
12 hours ago
Ross Amphlett is attending Vespa Club of Melbourne's event
Thumbnail

Monthly Melbourne Breakfast SUN 14 Jan - New riders welcome at Abbotsford Convent Bakery (park inside the gates)

January 14, 2018 from 8:30am to 10:30am
The second Sunday of every month is Melbourne's regular get together at the Convent Bakery for a…See More
13 hours ago
Ross Amphlett is attending Vespa Club of Melbourne's event
Thumbnail

Geelong Monthly Breakfast Sun 17 Dec - new riders welcome at The Edge

December 17, 2017 from 8:30am to 10:30am
The fourth Sunday of every month is Geelong's monthly brealfast on the beautiful Geelong…See More
13 hours ago
Julie Pond left a comment for Miguel Meirelles
"Hi Miguel Welcome to our site.  We look forward to meeting you sometime soon.  We have an…"
14 hours ago
Jo Hedt updated their profile
16 hours ago
Miguel Meirelles is a new Registered User of Vespa Club of Melbourne - welcome!
16 hours ago
Jo Hedt might attend Greg_'s event
Thumbnail

Carlton Italian Festa - Sun 22 Oct Updated at Argyle Square

October 22, 2017 from 10am to 4pm
16 hours ago
Ross Amphlett updated their profile
18 hours ago
2 photos by Greg_ were featured
yesterday
Greg_ posted a photo
yesterday
Vincent Stok replied to Vincent Stok's discussion 1973 Vespa Super_Body Repairs
"Hi Julie...just Vince is fine. I thought some pictorial tech may interest some of the VCM…"
yesterday
Julie Pond commented on Greg_'s event 'Carlton Italian Festa - Sun 22 Oct Updated'
"Hi everyone, next Sunday is the Carlton Festival.  If you would like to join us please mark…"
yesterday
Belinda Dalli is attending David Atkinson's event
Thumbnail

MILK RUN RIDE Gippsland - November 18-19 at Canterbury or Bunyip

November 18, 2017 at 8:30am to November 19, 2017 at 4:30pm
ThemeMooo! This is a repeat of a 2-day weekend ride we did two years ago. We'll learn about…See More
yesterday
Julie Pond replied to Vincent Stok's discussion 1973 Vespa Super_Body Repairs
"My goodness Vincent, that is some mighty fine work you have done on this vespa and thank you for…"
yesterday
Alessio replied to Vincent Stok's discussion 1973 Vespa Super_Body Repairs
"thanks, i didnt know how to display the photos like that"
Sunday
Kelly Joy Smith is attending Vespa Club of Melbourne's event
Thumbnail

Annual Christmas Celebration - Sun 3 Dec at Pertutti

December 3, 2017 from 11am to 3pm
Members!Come along and celebrate another great year of riding at our annual Christmas Party. Right…See More
Sunday

© 2017   Vespa Club of Melbourne Incorporated in Victoria A005069N   Powered by

Badges  |  Report an Issue  |  Terms of Service